Vim bietet viele Konfigurationsmöglichkeiten. Und da es noch nicht genug Seiten im Inet gibt, dachte ich mir, auch mal meine .vimrc zu veröffentlichen :) 

So, here we go!

scriptencoding utf-8

" ^^ Please leave the above line at the start of the file.

" Default configuration file for Vim
" $Header: /var/cvsroot/gentoo-x86/app-editors/vim-core/files/vimrc-r3,v 1.1 2006/03/25 20:26:27 genstef Exp $

" Written by Aron Griffis <agriffis@gentoo.org>
" Modified by Ryan Phillips <rphillips@gentoo.org>

" Modified some more by Ciaran McCreesh <ciaranm@gentoo.org>
" Added Redhat's vimrc info by Seemant Kulleen <seemant@gentoo.org>

" You can override any of these settings on a global basis via the
" "/etc/vim/vimrc.local" file, and on a per-user basis via "~/.vimrc". You may

" need to create these.

" {{{ General settings
" The following are some sensible defaults for Vim for most users.
" We attempt to change as little as possible from Vim's defaults,
" deviating only where it makes sense

set nocompatible        " Use Vim defaults (much better!)

set bs=2                " Allow backspacing over everything in insert mode
set ai                  " Always set auto-indenting on

set history=50          " keep 50 lines of command history

set ruler               " Show the cursor position all the time

set viminfo='20,\"500   " Keep a .viminfo file.

" Don't use Ex mode, use Q for formatting
map Q gq

" When doing tab completion, give the following files lower priority. You may
" wish to set 'wildignore' to completely ignore files, and 'wildmenu' to enable
" enhanced tab completion. These can be done in the user vimrc file.
set suffixes+=.info,.aux,.log,.dvi,.bbl,.out,.o,.lo

" When displaying line numbers, don't use an annoyingly wide number column. This
" doesn't enable line numbers -- :set number will do that. The value given is a
" minimum width to use for the number column, not a fixed size.
if v:version >= 700
  set numberwidth=3

" }}}

" {{{ Modeline settings
" We don't allow modelines by default. See bug #14088 and bug #73715.
" If you're not concerned about these, you can enable them on a per-user
" basis by adding "set modeline" to your ~/.vimrc file.

set nomodeline
" }}}

" {{{ Locale settings
" Try to come up with some nice sane GUI fonts. Also try to set a sensible
" value for fileencodings based upon locale. These can all be overridden in

" the user vimrc file.
if v:lang =~? "^ko"
  set fileencodings=euc-kr
  set guifontset=-*-*-medium-r-normal--16-*-*-*-*-*-*-*

elseif v:lang =~? "^ja_JP"
  set fileencodings=euc-jp
  set guifontset=-misc-fixed-medium-r-normal--14-*-*-*-*-*-*-*
elseif v:lang =~? "^zh_TW"

  set fileencodings=big5
  set guifontset=-sony-fixed-medium-r-normal--16-150-75-75-c-80-iso8859-1,-taipei-fixed-medium-r-normal--16-150-75-75-c-160-big5-0
elseif v:lang =~? "^zh_CN"

  set fileencodings=gb2312
  set guifontset=*-r-*

" If we have a BOM, always honour that rather than trying to guess.
if &fileencodings !~? "ucs-bom"

  set fileencodings^=ucs-bom

" Always check for UTF-8 when trying to determine encodings.
if &fileencodings !~? "utf-8"

  set fileencodings+=utf-8

" Make sure we have a sane fallback for encoding detection
set fileencodings+=default
" }}}

" {{{ Syntax highlighting settings
" Switch syntax highlighting on, when the terminal has colors
" Also switch on highlighting the last used search pattern.
if &t_Co > 2 || has("gui_running")

  syntax on
  set hlsearch
" }}}

" {{{ Terminal fixes

if &term ==? "xterm"
  set t_Sb=^[4%dm
  set t_Sf=^[3%dm
  set ttymouse=xterm2


if &term ==? "gnome" && has("eval")
 " Set useful keys that vim doesn't discover via termcap but are in the

 " builtin xterm termcap. See bug #122562. We use exec to avoid having to
 " include raw escapes in the file.
  exec "set <C-Left>=\eO5D"
  exec "set <C-Right>=\eO5C"

" }}}

" {{{ Filetype plugin settings
" Enable plugin-provided filetype settings, but only if the ftplugin
" directory exists (which it won't on livecds, for example).
if isdirectory(expand("$VIMRUNTIME/ftplugin"))

  filetype plugin on

 " Uncomment the next line (or copy to your ~/.vimrc) for plugin-provided
 " indent settings. Some people don't like these, so we won't turn them on by

 " default.

 " filetype indent on
" }}}

" {{{ Fix &shell, see bug #101665.

if "" == &shell

  if executable("/bin/bash")
    set shell=/bin/bash
  elseif executable("/bin/sh")

    set shell=/bin/sh

" {{{ Our default /bin/sh is bash, not ksh, so syntax highlighting for .sh
" files should default to bash. See :help sh-syntax and bug #101819.

if has("eval")
  let is_bash=1

" }}}

" {{{ Autocommands
if has("autocmd")

augroup gentoo

 " Gentoo-specific settings for ebuilds. These are the federally-mandated
 " required tab settings. See the following for more information:
 " http://www.gentoo.org/proj/en/devrel/handbook/handbook.xml
 " Note that the rules below are very minimal and don't cover everything.
 " Better to emerge app-vim/gentoo-syntax, which provides full syntax,

 " filetype and indent settings for all things Gentoo.
  au BufRead,BufNewFile *.e{build,class} let is_bash=1|setfiletype sh

  au BufRead,BufNewFile *.e{build,class} set ts=4 sw=4 noexpandtab

 " In text files, limit the width of text to 78 characters, but be careful
 " that we don't override the user's setting.
  autocmd BufNewFile,BufRead *.txt
 \ if &tw == 0 && ! exists("g:leave_my_textwidth_alone") |

 \     setlocal textwidth=78 |
 \ endif

 " When editing a file, always jump to the last cursor position

  autocmd BufReadPost *
 \ if ! exists("g:leave_my_cursor_position_alone") |

 \     if line("'\"") > 0 && line ("'\"") <= line("$") |

 \         exe "normal g'\"" |
 \     endif |
 \ endif

 " When editing a crontab file, set backupcopy to yes rather than auto. See
 " :help crontab and bug #53437.
  autocmd FileType crontab set backupcopy=yes

augroup END

endif " has("autocmd")
" }}}

" {{{ vimrc.local

if filereadable("/etc/vim/vimrc.local")
  source /etc/vim/vimrc.local

" }}}

" vim: set fenc=utf-8 tw=80 sw=2 sts=2 et foldmethod=marker :

" Meine Einstellungen
" Uebernommen von Mandrake

colorscheme elflord
colorscheme pablo
colorscheme ron
set ruler
set showmatch

set statusline=[%n]\ %<%f%=\ [%1*%M%*%R%H%W%Y]\ %-19(%3l,%02c%03V%)\ %P\ %o\ '%03b'
set laststatus=2
set incsearch
set modeline

set backup

set cursorline
"set cursorcolumn

"""""""""""""""""" Firma
set number showmatch nocompatible

syntax on

" from http://stackoverflow.com/questions/65076/how-to-setup-vim-properly-for-editing-python-files-py
" configure expanding of tabs for various file types
au BufRead,BufNewFile *.py set expandtab

au BufRead,BufNewFile *.c set noexpandtab
au BufRead,BufNewFile *.h set noexpandtab

au BufRead,BufNewFile Makefile* set noexpandtab

" --------------------------------------------------------------------------------
" configure editor with tabs and nice stuff...

" --------------------------------------------------------------------------------
set expandtab           " enter spaces when tab is pressed
set textwidth=120       " break lines when line length increases

set tabstop=4           " use 4 spaces to represent tab
set softtabstop=4
set shiftwidth=4        " number of spaces to use for auto indent

set autoindent          " copy indent from current line when starting a new line

" make backspaces more powerfull
set backspace=indent,eol,start

set ruler               " show line and column number
syntax on               " syntax highlighting
set showcmd             " show (partial) command in status line

"""""""""""""""""" Firma


Schreibe einen Kommentar

Trage deine Daten unten ein oder klicke ein Icon um dich einzuloggen:


Du kommentierst mit Deinem WordPress.com-Konto. Abmelden / Ändern )


Du kommentierst mit Deinem Twitter-Konto. Abmelden / Ändern )


Du kommentierst mit Deinem Facebook-Konto. Abmelden / Ändern )

Google+ Foto

Du kommentierst mit Deinem Google+-Konto. Abmelden / Ändern )

Verbinde mit %s